Optimal Power Management Settings for your EnSURE™ Touch
Optimal Display and Power Settings
From the Home Screen, tap Settings.
Tap General.
Tap Display & Power Off.
Adjust the Display & Power Off settings as listed below.
Set Display Brightness to 40% or less.
Set Display Timeout to 1-5 minutes.
Set Power Off After Display Timeout to Off.
Set Power Off Daily at to Off.
Power Saving Recommendations
Letting the screen sleep between tests or putting the screen to sleep by pressing the power button once will extend the battery charge.
Turn the Wi-Fi off while the device is in use can help to increase the battery life on your luminometer. You only need the Wi-Fi on when syncing, updating the software, or getting remote technical support.
Go to Settings > Wi-Fi and tap the toggle to turn Wi-Fi off.
Make certain that the EnSURE Touch is properly powered off after use by holding the power for about 1-2 seconds then selecting Power Off from the menu that appears.
Enabling the ‘After Display Timeout’ and/or the ‘Daily At’ will result in your luminometer automating the shutdown process thus requiring a power reset sequence to reinitiate the operating system. If pressing the power button does not initiate the operating system, please try a 12 second hold on the power button.
If you are having trouble with the battery life on your EnSURE Touch, please contact Hygiena Technical Support for assistance.
